Latviešu (Latvija)
Русский (Россия)
TIG stienis ALMg4.5 Mn 2.4mm*1000mm
Item No.
4210056-24
Properties and Applications Alloy 5183 is a special aluminium alloy solid TIG rod containing 5% Magnesium and 0.75% Manganese for improved weld strength and resistance to sea water. Alloy 5183 is used to weld forged and cast aluminium-manganese alloys where high tensile strengths and/or high
Description
| Properties and Applications |
Alloy 5183 is a special aluminium alloy solid TIG rod containing 5% Magnesium and 0.75% Manganese for improved weld strength and resistance to sea water. Alloy 5183 is used to weld forged and cast aluminium-manganese alloys where high tensile strengths and/or high resistance to sea water is required. |
 |
| REQUIREMENTS |
| Commonly used on welding: marine components, cryogenics, and aluminium alloys such as 5083, 5086, 5456, to each other or to 5052, 5652 and 5056 |
| Alloy 5183 was originally developed in 1957 to provide the highest strengths possible in the as welded condition of alloy 5083 and other similar high magnesium alloys. The more common filler alloy 5356, will typically fail to meet the as-welded tensile specification. |
| Recommended for welding 5083 type material in the annealed condition, particularly for low temperature applications where good ductility and toughness are required such as cryogenic plants and boat building. |
| Standards | |
S/ASME SFA 5.10 | ER5183 |
EN ISO 18273 | S Al 5183 (AlMg4.5Mn0.7(A)) |
| Typical Chemical Values of Weld Metal | |||||||||||
| Type of Analysis | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Al | Be | Other |
| Weld Deposit | 0.40 max | 0.40 max | 0.1 max | 0.5 - 1.0 | 4.3-5.2 | 0.05-0.25 | 0.25 max | 0.15 max | rest | 0.0003 max | 0.05 - 0.15 |
| Typical Mechanical Values of Weld Metal (%) | |||||
| Test Condition | Yield Strength (N/mm²) | Tensile Strength (N/mm²) | Elongation A5 (%) | Charpy V-Notch Properties (J) | |
| As welded | 140 | 290 | 25 | +20°C → 90 | |
| Application Information | |
| Welding Positions : |        |
| Polarity: |
|
| Approvals |
TÜV (02319.) DB (61.014.05) CE |
| Approvals are based on factory location. Please contact for more information |
| Consumer characteristics | |
Shielding gases: | (EN ISO 14175) I1, I3 |
Current type, polarity | AC |
Characteristics and typical fields of application | Sold wire for welding of AlMg alloys. The weld metal is resistant against sea water. Base material should be cleaned near the seam. Pre-heating 150 °C for plates > 15 mm |
Base Material | AlMg 4.5 Mn 3.3547 EN AW-5083 [AlMg 4.5 Mn 0.7] AlMg 4 Mn 3.3545 EN AW-5086 [AlMg 4] AlMg 5 3.3555 EN AW-5019 [AlMg 5] AlMgSi 0.5 3.3206 EN AW-6060 [AlMgSi] AlMgSi 0.7 3.3210 EN AW-6005A [AlSiMg(A)] AlMgSi 1 3.2315 EN AW-6082 [AlSi 1 MgMn] AlMg 1 SiCu 3.3211 EN AW-6061 [AlMg 1 SiCu] AlZn 4.5 Mg 3.4335 EN AW-7020 [AlZn 4.5 Mg 1] G-AlMg 5 3.3561 EN AC-51300 G-AlMg 5 Si 3.3261 EN AC-51400 |
Storage & Re-Drying Information |
| Shouldn t be exposed to high statical load and impact |
Specifications
| Net Weight, kg | 0.01 |
| Gross Weight, kg | 0.01 |
| Gas volume, m 3 | 0 |
| Standard rental price, EUR/day (exl. VAT) | 0 |
Reviews (0)
There are no reviews yet.