Stieple alumīnija metināšanai AlSi 5 0.8mm 0.45kg

TECWELD is a family company founded in 1997 in Poland. It is one of the largest direct importers of welding products from Asia and Europe to Poland. TECWELD products under the "Sherman`s" brand are synonymous with good quality at a reasonable price.

Aluminum wire with 5% silicon content, intended for argon welding of ALSi and ALMg-Si alloys containing up to 7% silicon. The weld has an average strength but a good thermal crack resistance. The weld area must be cleaned to a metallic sheen.

One of the most widely used welding and brazing alloys and can be classed as a general purpose filler alloy. The silicon additions result in improved fluidity (wetting action) to make the alloy a preferred choice by welders. The alloy is not sensitive to weld cracking and produces bright and almost smut free welds. Not recommended for anodizing. Non-heat treatable.

Typical Tensile Properties

Condition	Elongation	Tensile Strength	Yield Strength
As Welded	18 %	124 MPa (18 ksi)	55 MPa (8 ksi)

Typical Weld Metal Analysis %

Typical Wire Composition %
Al	Cu	Fe	Mn	Si	Ti	Zn
Rem %	0.02 %	0.14 %	0.01 %	5.00 %	0.01 %	0.01 %

Recommended Welding Parameters

Current	Voltage	Wire Diameter
60-170 A	13-24 V	0.8 mm (0.030 in.)
100-130 A	18-22 V	0.8 mm (0.030 in.)
125-150 A	20-24 V	0.8 mm (0.030 in.)