Stieple alumīnija metināšanai AlSi 5 0.8mm 0.45kg
Produkta Nº
4211090-0.8
TECWELD is a family company founded in 1997 in Poland. It is one of the largest direct importers of welding products from Asia and Europe to Poland. TECWELD products under the "Sherman`s" brand are synonymous with good quality at a reasonable price. Aluminum wire with 5% silicon content, intended
Apraksts
TECWELD is a family company founded in 1997 in Poland. It is one of the largest direct importers of welding products from Asia and Europe to Poland. TECWELD products under the "Sherman`s" brand are synonymous with good quality at a reasonable price.
Aluminum wire with 5% silicon content, intended for argon welding of ALSi and ALMg-Si alloys containing up to 7% silicon. The weld has an average strength but a good thermal crack resistance. The weld area must be cleaned to a metallic sheen.
One of the most widely used welding and brazing alloys and can be classed as a general purpose filler alloy. The silicon additions result in improved fluidity (wetting action) to make the alloy a preferred choice by welders. The alloy is not sensitive to weld cracking and produces bright and almost smut free welds. Not recommended for anodizing. Non-heat treatable.
Aluminum wire with 5% silicon content, intended for argon welding of ALSi and ALMg-Si alloys containing up to 7% silicon. The weld has an average strength but a good thermal crack resistance. The weld area must be cleaned to a metallic sheen.
One of the most widely used welding and brazing alloys and can be classed as a general purpose filler alloy. The silicon additions result in improved fluidity (wetting action) to make the alloy a preferred choice by welders. The alloy is not sensitive to weld cracking and produces bright and almost smut free welds. Not recommended for anodizing. Non-heat treatable.
Typical Tensile Properties
Condition | Elongation | Tensile Strength | Yield Strength |
As Welded | 18 % | 124 MPa (18 ksi) | 55 MPa (8 ksi) |
Typical Weld Metal Analysis %
Typical Wire Composition % | ||||||||||||||
Al | Cu | Fe | Mn | Si | Ti | Zn | ||||||||
Rem % | 0.02 % | 0.14 % | 0.01 % | 5.00 % | 0.01 % | 0.01 % |
Recommended Welding Parameters
Current | Voltage | Wire Diameter |
60-170 A | 13-24 V | 0.8 mm (0.030 in.) |
100-130 A | 18-22 V | 0.8 mm (0.030 in.) |
125-150 A | 20-24 V | 0.8 mm (0.030 in.) |
Raksturojums
Produkta masa, kg | 0,45 |
Bruto masa, kg | 0,46 |
Gāzes daudzums, m 3 | 0 |
Standarta nomas maksa, EUR/dienā (bez PVN) | 0 |
Komentāri (0)
Joprojām nav komentāru.